junta de cabezal de escape de puerto cuadrado remflex 3009
- Marca:
remflex
- Código producto: B00B2HMAMQ
- Disponibilidad: No hay Disponibilidad.
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-1-9/32 inch width x 2 inch height Square Port; Ford V8 - FE 352, 390, 410, 428, 1-9/32" x 2" square Port, Header Only, 2/Set
-Bolt Pattern fits all Fe Engines
-Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
-Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
-There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
All FE gaskets have "16 Bolt Hole Pattern". Use the 8 bolt holes needed - the other 8 bolt holes do not impact the performance of the gaskets in any way. (See Part Numbers 3008, 3015, 3047, 3050 and 3051 for additional FE Port Sizes & Applications). Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to control every step of the manufacturing process guaranteeing a superior product that you can rely upon. Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2000 degrees-day after day, week after week, year after year. For over 10 years Remflex has been bringing this technology to automotive enthusiasts of all kinds to eliminate exhaust leaks for good. Experience has shown that no gasket "should" be reused if you want a reliable seal, therefore Remflex do not sell or market gaskets as reusable even though it have been told that they have been reused successfully in the past. Do not use sealants of any type with Remflex gaskets. The sealant burns out rapidly leaving a gap which creates an exhaust leak. Remflex Exhaust Gaskets are good to 3000 degrees which far exceeds the temperature rating of any sealant.
-Bolt Pattern fits all Fe Engines
-Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite
-Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch
-There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts
All FE gaskets have "16 Bolt Hole Pattern". Use the 8 bolt holes needed - the other 8 bolt holes do not impact the performance of the gaskets in any way. (See Part Numbers 3008, 3015, 3047, 3050 and 3051 for additional FE Port Sizes & Applications). Remflex Exhaust Gaskets are soft and compressible so the suggested torque for each gasket, which is generally much lower than factory torque, is listed on the back of each package. Remflex is made in the USA so as to control every step of the manufacturing process guaranteeing a superior product that you can rely upon. Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2000 degrees-day after day, week after week, year after year. For over 10 years Remflex has been bringing this technology to automotive enthusiasts of all kinds to eliminate exhaust leaks for good. Experience has shown that no gasket "should" be reused if you want a reliable seal, therefore Remflex do not sell or market gaskets as reusable even though it have been told that they have been reused successfully in the past. Do not use sealants of any type with Remflex gaskets. The sealant burns out rapidly leaving a gap which creates an exhaust leak. Remflex Exhaust Gaskets are good to 3000 degrees which far exceeds the temperature rating of any sealant.
