múltiple de admisión edelbrock 2703 performer eps con tubo de llenado de aceite y respiradero
- Marca:
edelbrock
- Código producto: B001UQO3NS
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 737.424
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Idle-5500 RPM Range
-Dual Plane Type-4150 Style Flange
-3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
-Satin Finish
-Non-EGR W/ Oil Fill Tube
-fit type: Vehicle Specific
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 HP and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3. 74", B-4. 80"; Carb pad height: 4. 27". Port exit dimensions: 1. 15" x 1. 87". Camshaft Recommendations: #2102, #2103, #2208, #2209
-Dual Plane Type-4150 Style Flange
-3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
-Satin Finish
-Non-EGR W/ Oil Fill Tube
-fit type: Vehicle Specific
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 HP and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3. 74", B-4. 80"; Carb pad height: 4. 27". Port exit dimensions: 1. 15" x 1. 87". Camshaft Recommendations: #2102, #2103, #2208, #2209
